View BGA2712_270923.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
MBD128
BGA2712 MMIC wideband amplifier
Product specification Supersedes data of 2002 Jan 31 2002 Sep 10
Philips Semiconductors
Product specification
MMIC wideband amplifier
FEATURES * Internally matched to 50 * Wide frequency range (3.2 GHz at 3 dB bandwidth) * Flat 21 dB gain (DC to 2.6 GHz at 1 dB flatness) * 5 dBm saturated output power at 1 GHz * Good linearity (11 dBm IP3(out) at 1 GHz) * Unconditionally stable (K > 1.5). APPLICATIONS * LNB IF amplifiers * Cable systems * ISM * General purpose. DESCRIPTION Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363 SMD plastic package. QUICK REFERENCE DATA SYMBOL VS IS s212 NF PL(sat) PARAMETER DC supply voltage DC supply current insertion power gain noise figure saturated load power f = 1 GHz f = 1 GHz f = 1 GHz CONDITIONS 5 12.3 21.3 3.9 4.8 TYP. 6 - - - -
1
Top view Marking code: E2-. 6
BGA2712
PINNING PIN 1 2, 5 3 4 6 VS GND2 RF out GND1 RF in DESCRIPTION
6
5
4
1
3
2
3
MAM455
4
2, 5
Fig.1 Simplified outline (SOT363) and symbol.
MAX.
UNIT V mA dB dB dBm
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134) SYMBOL VS IS Ptot Tstg Tj PD PARAMETER DC supply voltage supply current total power dissipation storage temperature operating junction temperature maximum drive power CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. Ts 90 C CONDITIONS RF input AC coupled - - - -65 - - MIN. 6 35 200 +150 150 10 MAX. UNIT V mA mW C C dBm
2002 Sep 10
2
Philips Semiconductors
Product specification
MMIC wideband amplifier
THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to solder point CONDITIONS Ptot = 200 mW; Ts 90 C
BGA2712
VALUE 300
UNIT K/W
CHARACTERISTICS VS = 5 V; IS = 12.3 mA; Tj = 25 C; unless otherwise specified. SYMBOL IS s212 PARAMETER supply current insertion power gain f = 100 MHz f = 1 GHz f = 1.8 GHz f = 2.2 GHz f = 2.6 GHz f = 3 GHz RL IN RL OUT s122 NF BW K PL(sat) PL 1 dB IP3(in) IP3(out) return losses input return losses output isolation noise figure bandwidth stability factor saturated load power load power input intercept point output intercept point f = 1 GHz f = 2.2 GHz f = 1 GHz f = 2.2 GHz f = 1.6 GHz f = 2.2 GHz f = 1 GHz f = 2.2 GHz f = 1 GHz f = 2.2 GHz f = 1 GHz f = 2.2 GHz at 1 dB gain compression; f = 1 GHz at 1 dB gain compression; f = 2.2 GHz f = 1 GHz f = 2.2 GHz f = 1 GHz f = 2.2 GHz CONDITIONS 9 20 20 20 20 19 16 12 8 17 15 31 36 - - 1.5 2.5 3 0 -2 -4 -12 -14 9 4 MIN. TYP. 12.3 20.8 21.3 22 22 21.2 19.3 14 10 20 18 33 39 3.9 4.3 3.2 2 3 4.8 1.3 0.2 -2 -10 -16 11 6 MAX. 15 22 22 23 23 22 21 - - - - - - 4.3 4.7 - - - - - - - - - - - UNIT mA dB dB dB dB dB dB dB dB dB dB dB dB dB dB GHz - - dBm dBm dBm dBm dBm dBm dBm dBm
at s212 -3 dB below flat gain at 1 GHz 2.8
2002 Sep 10
3
Philips Semiconductors
Product specification
MMIC wideband amplifier
APPLICATION INFORMATION Figure 2 shows a typical application circuit for the BGA2712 MMIC. The device is internally matched to 50 , and therefore does not need any external matching. The value of the input and output DC blocking capacitors C2 and C3 should not be more than 100 pF for applications above 100 MHz. However, when the device is operated below 100 MHz, the capacitor value should be increased. The 22 nF supply decoupling capacitor C1 should be located as closely as possible to the MMIC. Separate paths must be used for the ground planes of the ground pins GND1 and GND2, and these paths must be as short as possible. When using vias, use multiple vias per pin in order to limit ground path inductance.
handbook, halfpage
BGA2712
DC-block handbook, halfpage 100 pF input
DC-block 100 pF
DC-block 100 pF output
MGU437
Fig.3 Easy cascading application circuit.
mixer to IF circuit or demodulator wideband amplifier
from RF circuit
MGU438
V halfpage handbook, s C1 Vs RF input C2 GND1 GND2
MGU435
oscillator
RF in
RF out C3
Fig.4 Application as IF amplifier.
RF output
handbook, halfpage
mixer to IF circuit or demodulator LNA wideband amplifier oscillator
MGU439
Fig.2 Typical application circuit.
antenna
Figure 3 shows two cascaded MMICs. This configuration doubles overall gain while preserving broadband characteristics. Supply decoupling and grounding conditions for each MMIC are the same as those for the circuit of Fig.2. The excellent wideband characteristics of the MMIC make it an ideal building block in IF amplifier applications such as LBNs (see Fig.4). As a buffer amplifier between an LNA and a mixer in a receiver circuit, the MMIC offers an easy matching, low noise solution (see Fig.5). In Fig.6 the MMIC is used as a driver to the power amplifier as part of a transmitter circuit. Good linear performance and matched input and output offer quick design solutions in such applications.
Fig.5 Application as RF amplifier.
handbook, halfpage
mixer to power amplifier wideband amplifier oscillator
from modulation or IF circuit
MGU440
Fig.6 Application as driver amplifier.
2002 Sep 10
4
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2712
handbook, full pagewidth
90 +1 135 +0.5 +2 45 1.0 0.8 0.6 0.4 0.2 180 0 0.2 0.5 100 MHz 4 GHz -0.2 -5 2 5 0 0
+0.2
+5
-0.5 -135 -1
-2
-45
MLD904
1.0
-90 IS = 12.3 mA; VS = 5 V; PD = -30 dBm; ZO = 50 .
Fig.7 Input reflection coefficient (s11); typical values.
handbook, full pagewidth
90 +1 135 +0.5 +2 45 1.0 0.8 0.6 0.4 0.2 180 0 0.2 0.5 4 GHz 2 5 0 100 MHz 0
+0.2
+5
-0.2
-5
-0.5 -135 -1
-2
-45
MLD905
1.0
-90 IS = 12.3 mA; VS = 5 V; PD = -30 dBm; ZO = 50 .
Fig.8 Output reflection coefficient (s22); typical values.
2002 Sep 10
5
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2712
handbook, halfpage s2
0
MLD906
handbook, halfpage
25
MLD907
12 (dB) -10
s21 2 (dB) 20
-20
(1)
-30 15
(2)
(3)
-40
-50
10 0 1000 2000 3000 f (MHz) PD = -30 dBm; ZO = 50 . (1) IS = 15.1 mA; VS = 5.5 V. (2) IS = 12.3 mA; VS = 5 V. (3) IS = 10.1 mA; VS = 4.5 V. 4000 0 1000 2000 3000 f (MHz) 4000
IS = 12.3 mA; VS = 5 V; PD = -30 dBm; ZO = 50 .
Fig.9
Isolation (s122) as a function of frequency; typical values.
Fig.10 Insertion gain (s212) as a function of frequency; typical values.
handbook, halfpage
10
MLD908
handbook, halfpage
10
MLD909
PL (dBm) 5
(1)
PL (dBm) 5
(2) (3)
(1) (2)
0
0
(3)
-5
-5
-10 -30
-20
-10
PD (dBm)
0
-10 -30
-20
-10
PD (dBm)
0
f = 1 GHz; ZO = 50 . (1) VS = 5.5 V. (2) VS = 5 V. (3) VS = 4.5 V.
f = 2.2 GHz; ZO = 50 . (1) VS = 5.5 V. (2) VS = 5 V. (3) VS = 4.5 V.
Fig.11 Load power as a function of drive power at 1 GHz; typical values.
Fig.12 Load power as a function of drive power at 2.2 GHz; typical values.
2002 Sep 10
6
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2712
handbook, halfpage
6
MLD902
handbook, halfpage
10 K
MLD903
NF (dB) 5
8
6
(1)
4
(3) (2)
4 3 2
2 0 1000 2000 f (MHz) 3000
0 0 1000 2000 3000 4000 f (MHz)
ZO = 50 . (1) IS = 15.1 mA; VS = 5.5 V. (2) IS = 12.3 mA; VS = 5 V. (3) IS = 10.1 mA; VS = 4.5 V.
IS = 12.3 mA; VS = 5 V; ZO = 50 .
Fig.13 Noise figure as a function of frequency; typical values.
Fig.14 Stability factor as a function of frequency; typical values.
2002 Sep 10
7
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... Scattering parameters VS = 5 V; IS = 12.3 mA; PD = -30 dBm; ZO = 50 ; Tamb = 25 C; s11 f (MHz) 100 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 8 MAGNITUDE (ratio) 0.04752 0.05643 0.09546 0.13547 0.17466 0.20739 0.24036 0.26469 0.29368 0.31261 0.31986 0.32544 0.31554 0.29374 0.26599 0.21222 0.17076 0.14479 0.11730 0.08946 0.06606 ANGLE (deg) -13.48 22.73 39.62 37.16 32.62 27.40 23.23 18.36 13.54 8.127 1.984 -4.878 -13.05 -21.53 -28.39 -31.80 -31.52 -32.14 -35.25 -46.06 -64.65 s21 MAGNITUDE (ratio) 10.9826 11.0172 11.0842 11.1812 11.3239 11.5760 11.8439 12.1222 12.3892 12.5808 12.6359 12.4802 12.2649 11.5087 10.4126 9.17830 8.12024 7.38827 6.96284 6.62125 6.32249 ANGLE (deg) -1.753 -6.898 -15.64 -24.08 -32.64 -41.38 -50.97 -61.14 -72.07 -83.89 -96.79 -110.7 -125.2 -139.8 -152.8 -163.8 -171.0 -176.5 177.3 171.3 165.6 s12 MAGNITUDE (ratio) 0.03355 0.03308 0.03111 0.02829 0.02501 0.02145 0.01788 0.01489 0.01262 0.01132 0.01102 0.01151 0.01238 0.01322 0.01362 0.01335 0.01239 0.01150 0.01108 0.01107 0.01178 ANGLE (deg) -2.342 -7.340 -15.47 -21.84 -26.57 -30.44 -31.20 -28.60 -22.41 -12.86 -2.369 5.585 9.990 11.44 10.70 9.622 10.22 15.36 19.97 27.62 34.46 s22 MAGNITUDE (ratio) 0.07706 0.07237 0.07314 0.07471 0.08218 0.10113 0.11792 0.13314 0.14376 0.14606 0.13749 0.11928 0.08992 0.05626 0.02424 0.02731 0.04752 0.06279 0.07643 0.09760 0.12925 ANGLE (deg) -170.0 164.8 130.7 101.8 72.30 47.04 25.82 10.96 -1.624 -13.51 -24.90 -37.21 -51.50 -68.53 -110.2 159.1 135.0 132.1 142.1 153.5 160.6 KFACTOR 1.5 1.5 1.6 1.7 1.9 2.0 2.3 2.6 3.0 3.2 3.2 3.1 3.0 3.1 3.3 4.0 4.9 5.8 6.4 6.7 6.6 2002 Sep 10 Philips Semiconductors
MMIC wideband amplifier BGA2712
Product specification
Philips Semiconductors
Product specification
MMIC wideband amplifier
PACKAGE OUTLINE Plastic surface mounted package; 6 leads
BGA2712
SOT363
D
B
E
A
X
y
HE
vMA
6
5
4
Q
pin 1 index
A
A1
1
e1 e
2
bp
3
wM B detail X Lp
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.30 0.20 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT363
REFERENCES IEC JEDEC EIAJ SC-88
EUROPEAN PROJECTION
ISSUE DATE 97-02-28
2002 Sep 10
9
Philips Semiconductors
Product specification
MMIC wideband amplifier
DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS
BGA2712
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Preliminary data
Qualification
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2002 Sep 10
10
Philips Semiconductors
Product specification
MMIC wideband amplifier
NOTES
BGA2712
2002 Sep 10
11
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2002
SCA74
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613516/02/pp12
Date of release: 2002
Sep 10
Document order number:
9397 750 10022

▲Up To Search▲

Price & Availability of BGA2712

	To Download BGA2712 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .